home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Overload Trio 2
/
Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO
/
dir31
/
jazzfake.zip
/
KORGM1.DOC
< prev
next >
Wrap
Text File
|
1991-11-27
|
4KB
|
81 lines
KORGM1.DK help file.
Loading in the file KorgM1.DK will set up Band-in-a-Box for the KorgM1
synthesizer. It will set up :
1. Drum #'s for Korg M1 Kit 1 (Patch 9 )
2. Patch Map (assigned to factory settings of Korg M1)
3. Startup Patches and Channels in Midi window.
If you have modified the Patches in your M1 from the factory settings
you may have to modify the Patch Map in BB (from the MIDI pull down menu).
The only remaining step for you is to setup the Korg M1 in Multi-Timbral
mode to receive multiple instruments at once. In "Program mode" the M1
will only play 1 instrument at a time. In Combination mode it will play
up to 8 at once- so you want to be in combination mode and setup a
combination.
To Setup the M1 , from the M1 front panel:
1. Go to Combination Mode "COMB". Select combo #0 by pressing 00 on the
# pad.
2. Then press the EDIT COMBO button to EDIT The Combination
3. You will then be using the PAGE + and PAGE - keys to PAGE
through the Combination setting up each of the 8 instruments
each of the A-H keys represents a different instrument.
Setup your Combination as follows:
A B C D E F G H
Bass Piano Drums Guitar Horns Strings Melody Thru
Page 0 Combination type MULTI
Page 1 Program # 66 42 9 4 22 27 22 4
Page 2 Channel 2 3 10 7 8 6 4 5
Page 3 Key Window Type ALL= G9
Page 4 Output 90 90 90 90 90 90 90 90
Page 5 Transpose 0 0 0 0 0 0 0 0
Page 6 Pan Pot 5:5 is in the middle - can separate as you like
Page 7 Enable Prg All should be Enabled
Page 8 Effect 1= "4:Room Reverb" :ON
0.7 D022 E76 HD10 L:0 H:0 80:20
Effect 2 = "12:Chorus 1 ":ON
M60 S0.30 D010 TRI L:0 H:0 86:14
Then Go to PAGE 9 and SAVE the Combination by pressing the 'G' key
twice.
!!!
IT IS ESSENTIAL THAT YOU SET THE 'GLOBAL CHANNEL' ON THE M1 TO ANU UNUSED
CHANNEL - EG. CHANNEL 1 . DO THIS FROM THE 'GLOBAL' BUTTON THEN KEY#5.
OTHERWISE A PATCH CHANGE SENT ON THE GLOBAL CHANNEL WILL CHANGE THE
COMBINATION FROM THE "BAND-IN-A-BOX COMBO" TO A DIFFERENT COMBO.
!!!
Once you have done this , Band-in-a-Box is ready to Play your M1
just by you selecting COMBO 0 from the M1 panel ( as long as you
have loaded in the KorgM1.DK file into BB and then saved it as MYSETUP.DK)
YOU WILL NOW BE READY TO GO WITH BB AND THE M!.
INFO BELOW IS OPTIONAL/ADDITIONAL.
You may want to fine tune the Combination by adjusting
Page 4 Output levels : If you find 1 instrument always too loud/soft
EDIT/Save the Combination to adjust
Page 6 Pan Pot : adjust for stereo placemant of instruments
Page 8 Effects , adjust the Reverb/Chorus if too strong/weak
OPTIONAL- Edit the Volume/Octave of an M1 sound (program)
Most of the BB styles were made on a Roland Sound Canvas. The Korg M1
patches are sometimes louder or softer than the Sound Canvas. The best
way to correct this is to Edit the M1 program to make the sound quieter
or louder. This can be done by selecting a Program then choosing EDIT
program. PAGE + once to get to the screen that says OSC1 .
The D key then gets you to the setting the Level (volume) of the sound.
The E key sets the Octave of the sound 4' 8' 16' (feet).
Some sounds use two oscillators so Page + and repeat if present for OSC2.
Have Fun!